No Current Solutions

From HAWKMS Wiki
Revision as of 12:00, 25 September 2014 by 66.83.33.218 (talk) (Created page with "The pump motor is bad so make sure there is power going to the motor. If the motor does not spin then it is faulty. The Contactor is bad so check the power coming in at...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The pump motor is bad so make sure there is power going to the motor.

If the motor does not spin then it is faulty.

The Contactor is bad so check the power coming in at L1/L2 and the power going out at T1/T2.

Check to see that the Breaker is on. /Caution/ Breaker may trip because the pump is bad.

Check to see if the Manual Pump Switch is turned on.

Check for a faulty control circuit.